|
Product Details:
|
| Bulk Density: | 2.55-2.8g/cm3 | Refractoriness: | 1796min. |
|---|---|---|---|
| Al2O3 Content: | 43-46% | SiO2 Content: | 50.5-52.5 |
| Packaging Details: | 25 Kgs In Plastic Bag, 40 Bags/Pallet | Material: | Mullite |
| High Light: | Refractory Sand 1796min.,1796min. Sand Used For Casting,Metallurgy Industry Sand Used For Casting |
||
Foundry Mullite Sand Precision Refractory Sand 30/60 Mesh For Metallurgy/Petroleum Industry
1. Mullite Sand Introduction
Mullite is a kind of aluminosilicate refractory material. It is made of hard clay mineral resources by high-temperature roasting, crushing, screening, Raymond, iron removal and other machining processes.
It has high aluminum content, low iron content, small coefficient of thermal expansion, high refractoriness, stable thermochemical properties and other excellent mullite series sands and powders.
2. Mullite Sand Specifications
| Item/ Grade | Specifications | |||
| E-45 | E-44 | E-43 | E-42 | |
| Al2O3 % | 45-48 | 44-46 | 43-45 | 42-45 |
| Fe2O3 % | 0.8-1.2 | 1.2-1.5 | 1.5-2.0 | 2.0-3.0 |
| SiO2 % | 49-52 | 50-53 | 50-53 | 51-54 |
| Ti02 % | 0.8 | 0.9 | 1.0 | 1.2 |
| K2O+Na2O % | 0.3 | 0.4 | 0.4 | 0.5 |
| CaO+MgO % | 0.5 | 0.5 | 0.6 | 0.7 |
| Bulk density g/cm3(min) | 2.55 | 2.53 | 2.50 | 2.46 |
| Refractoriness °C (min) | 1770 | 1760 | 1740 | 1720 |
| Mullte Phase% (min) | 65 | 60 | 55 | 45 |
3. Mullite Sand General advantages
Ø Easy out of shell.
Ø No deformation and No reduced scale.
Ø Good brightness and Good finish.
3. Mullite Sand Characteristics
Ø High refractoriness.
Ø Aluminum content high, the iron content low.
Ø High volume density.
Ø Thermal expansion coefficients of small.
Ø Physicochemical stability.
Ø Fully calcined and Dust content low
Ø The specification standards.
4. Mullite Sand Particle sizes Available
Ø Size of sand: 8-16,16-30,30-60,30-80,60-80,80-120 (mesh):Used for investment casting.
Ø Size of powder: -200mesh,-270mesh,-325mesh: Used for investment casting and refractories.
Ø Size of particle: 0-1mm,1-3mm,3-5mm,5-8mm,8-15mm,0-5mm,0-50mm:Used for refractories.
5. Mullite Sand Applications
Sintered mullite sand and flour is widely used in investment casting, gypsum filling V method and vacuum suction casting, as well as large, medium and small steel casting, copper casting, furnace lining refractories, as well as water glass, refractory products, concrete materials, etc.
Widely used in machinery, aviation, weapons, metallurgy, petroleum, heat preservation, sintering, construction and other industries.
Contact Person: Jason Chen
Tel: 86-18603794999
